AVG Support

[Rob Freeman]

----- Original Message -----
From: "Rob Freeman" <sysadmin at FLEETONE.COM>
To: <MAILSCANNER at JISCMAIL.AC.UK>
Sent: Friday, April 02, 2004 11:06 AM
Subject: Re: AVG Support


> ----- Original Message -----
> From: "Rick Cooper" <rcooper at DWFORD.COM>
> To: <MAILSCANNER at JISCMAIL.AC.UK>
> Sent: Friday, April 02, 2004 11:02 AM
> Subject: Re: AVG Support
>
>
> > > -----Original Message-----
> > > From: MailScanner mailing list [mailto:MAILSCANNER at JISCMAIL.AC.UK]On
> > > Behalf Of Rob Freeman
> > > Sent: Friday, April 02, 2004 11:23 AM
> > > To: MAILSCANNER at JISCMAIL.AC.UK
> > > Subject: Re: AVG Support
> > >
> > >
> > > I am getting closer:
> > >
> > > Hunk #1 FAILED at 352.
> > > Hunk #3 succeeded at 2434 with fuzz 2 (offset -1 lines).
> > > 1 out of 3 hunks FAILED -- saving rejects to file
> > > /usr/lib/MailScanner/MailScanner/SweepViruses.pm.rej
> > >
> > > I used my original SweepViruses.pm to get to this point.  I am running
> > > MailScanner 4.29.7 on fedora
> > >
> > > The reject message is:
> > >
> >
> > What is located at line 352 - 359 in you SweepViruses.pm?
> > it would appear something is missing or added  between those lines.
> >
> > > ***************
> > > *** 352,359 ****
> > >       ProcessOutput     => \&NeverHappens,
> > >       SupportScanning   => $S_NONE,
> > >       SupportDisinfect  => $S_NONE,
> > >     },
> > >   );
> > >
> > >   # Initialise the Sophos SAVI library if we are using it.
> > >   sub initialise {
> > > --- 352,370 ----
> > >       ProcessOutput     => \&NeverHappens,
> > >       SupportScanning   => $S_NONE,
> > >       SupportDisinfect  => $S_NONE,
> > >     },
> > > +   "avg"   => {
> > > +     Name              => 'Avg',
> > > +     Lock                => 'AvgBusy.lock',
> > > +     CommonOptions       => '-arc -ext=*',
> > > +     DisinfectOptions    => '',
> > > +     ScanOptions         => '',
> > > +     InitParser          => \&InitAvgParser,
> > > +     ProcessOutput       => \&ProcessAvgOutput,
> > > +     SupportScanning     => $S_SUPPORTED,
> > > +     SupportDisinfect    => $S_SUPPORTED,
> > > +   },
> > >   );
> > >
> > >   # Initialise the Sophos SAVI library if we are using it.
> > >   sub initialise {
> > >
> > > The patch command I ran was:
> > >
> > > patch /usr/lib/MailScanner/MailScanner/SweepViruses.pm
> > > ./SweepVirusesAvg.diff
> > >
> > <snip>
>
> Here are those lines:
>
>     InitParser          => \&NeverHappens,
>     ProcessOutput       => \&NeverHappens,
>     SupportScanning     => $S_NONE,
>     SupportDisinfect    => $S_NONE,
>   },
> );
>
> # Initialise the Sophos SAVI library if we are using it.
> sub initialise {
>
>
> It is the lines for the "none" section.


Ok, I got it working.  I ended up having to add the lines manually to the
file after the patch failed.  Only the lines from the failed .rej file.
Once that was added, it works:

 Avg: Found virus EICAR_Test in file eicar.com

Rob