[Fwd: Re: Problem after upgrading SA to 2.60]

[Mike Kercher]

I think it has to do with the varying locations of files across various
distributions which can all use the same .rpm

I'll reserve my comments about Top Posting Whiners for another day.


-----Original Message-----
From: MailScanner mailing list [mailto:MAILSCANNER at JISCMAIL.AC.UK] On Behalf
Of Bret Hughes
Sent: Thursday, September 25, 2003 8:50 AM
To: MAILSCANNER at JISCMAIL.AC.UK
Subject: [Fwd: Re: Problem after upgrading SA to 2.60]


Meant to send to list:
>
> Man top posting makes trimming posts a pain.
>
> Has anyone tried to figure out what is wrong with the rpm that the 
> tarball install works but the rpm does not?
>
> Bret
>
> On Thu, 2003-09-25 at 07:48, Rob Charles wrote:
> > I did that and it worked like a charm....
> >
> > Thanks!
> > ----- Original Message -----
> > From: "Mike Kercher" <mike at CamaroSS.net>
> > To: "'Rob Charles'" <rob at thehostmasters.com>
> > Sent: Wednesday, September 24, 2003 7:57 PM
> > Subject: RE: Problem after upgrading SA to 2.60
> >
> >
> > > I would remove the .rpm installation and install the tarball.  I 
> > > think
> > that
> > > is what Julian has suggested many times in the past.
> > >
> > > Mike
> > >
> > > -----Original Message-----
> > > From: MailScanner mailing list [mailto:MAILSCANNER at JISCMAIL.AC.UK] 
> > > On
> > Behalf
> > > Of Rob Charles
> > > Sent: Wednesday, September 24, 2003 5:36 PM
> > > To: MAILSCANNER at JISCMAIL.AC.UK
> > > Subject: Problem after upgrading SA to 2.60
> > >
> > >
> > > Hello all,  I am sure some of you might have come across this 
> > > issue before....
> > >
> > > First off MS and SA are great....
> > >
> > > Now my problem is this, after upgrading MS to the latest,  I then 
> > > realized that the upgrade does not upgrade SA, after posting to 
> > > the list.
> > >
> > > So now I went and got the rpms for SA and did a rpm -U to upgrade 
> > > SA to
> > 2.60
> > > from  2.31, now when I start MS I get the following in the log 
> > > file....
> > >
> > > Sep 24 18:22:33 mx3 MailScanner[26736]: SpamAssassin installation 
> > > could
> > not
> > > be found
> > >
> > > I read ....
> > http://www.sng.ecs.soton.ac.uk/mailscanner/serve/cache/102.html
> > >
> > > But I still get the same problem....
> > >
> > > What am I forgetting to do? Or what am I doing wrong?
> > >
> > > I am on Redhat 8.0
> > >
> > > Thanks...
> > >
> > >
> > >
> > > Rob Charles
> > > TheHostMasters
> > > Montreal, Canada
> > > 514-846-0006
> > > Rob at TheHostMasters.com
> > > http://www.TheHostMasters.com
> > >
> > >
> > >
> > >
> > >
>