MailScanner + SpamAssassin

[Roger Jochem]

I´ll made all the changes in Perl (now I´m running 5.6.1), reinstalled
SpamAssassin, and now MailScanner is running
fine, without any message errors about SpamAssassin. How can I know if
spamassassin is working? I didn't received any message saying it was a Spam
detected by SpamAssassine yet (for about an hour)...

----- Original Message -----
From: "Denis Beauchemin" <Denis.Beauchemin at USHERBROOKE.CA>
To: <MAILSCANNER at JISCMAIL.AC.UK>
Sent: Friday, October 17, 2003 11:43 AM
Subject: Re: MailScanner + SpamAssassin


> Roger,
>
> Either start a new shell or type rehash and then retry perl -v.
>
> Denis
> Le ven 17/10/2003 à 10:16, Roger Jochem a écrit :
> > I made the steps you passed me, Julian, and now I'm only with perl 5.6.1
in
> > /usr/bin. But whin i type perl -v it says /usr/local/bin/perl not
found...
> > And now, what can I do?
> >
> >
> >
> > ----- Original Message -----
> > From: "Julian Field" <mailscanner at ECS.SOTON.AC.UK>
> > To: <MAILSCANNER at JISCMAIL.AC.UK>
> > Sent: Friday, October 17, 2003 10:31 AM
> > Subject: Re: MailScanner + SpamAssassin
> >
> >
> > > rm /usr/local/bin/perl (and any other binaries in there that look they
are
> > > perl-related).
> > > rm -rf /usr/local/lib/perl*
> > > rm -rf /usr/local/perl*
> > >
> > >
> > > At 14:25 17/10/2003, you wrote:
> > > >I fount it.
> > > >
> > > >I have version 5.6.0 in /usr/local/bin and version 5.6.1 in /usr/bin
> > (what a
> > > >mess). How do I uninstall one of them?
> > > >
> > > >----- Original Message -----
> > > >From: "Roger Jochem" <roger at RUDNICK.COM.BR>
> > > >To: <MAILSCANNER at JISCMAIL.AC.UK>
> > > >Sent: Friday, October 17, 2003 10:22 AM
> > > >Subject: Re: MailScanner + SpamAssassin
> > > >
> > > >
> > > > > How can I do this?And If I find two copies, how can I uninstall
one of
> > > >them?
> > > > > Sorry but I am not very familiar with Perl...
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Denis Beauchemin" <Denis.Beauchemin at USHERBROOKE.CA>
> > > > > To: <MAILSCANNER at JISCMAIL.AC.UK>
> > > > > Sent: Friday, October 17, 2003 10:24 AM
> > > > > Subject: Re: MailScanner + SpamAssassin
> > > > >
> > > > >
> > > > > > Roger,
> > > > > >
> > > > > > If SA is working on its own, then if MS says it doesn't find it
it's
> > > > > > because it's not at the right place in the Perl directories.
> > > > > >
> > > > > > Make sure you don't have 2 copies of Perl on your system.  This
has
> > > > > > caused many problems to people.  Then reinstall SA.
> > > > > >
> > > > > > Denis
> > > > > > Le jeu 16/10/2003 à 17:33, Roger Jochem a écrit :
> > > > > > > Ok! Here goes the output...
> > > > > > >
> > > > > > > ebug: Score set 0 chosen.
> > > > > > > debug: running in taint mode? yes
> > > > > > > debug: Running in taint mode, removing unsafe env vars, and
> > resetting
> > > > > PATH
> > > > > > > debug: PATH included '/usr/local/sbin', keeping.
> > > > > > > debug: PATH included '/usr/local/bin', keeping.
> > > > > > > debug: PATH included '/sbin', keeping.
> > > > > > > debug: PATH included '/bin', keeping.
> > > > > > > debug: PATH included '/usr/sbin', keeping.
> > > > > > > debug: PATH included '/usr/bin', keeping.
> > > > > > > debug: PATH included '/usr/X11R6/bin', keeping.
> > > > > > > debug: PATH included '/usr/java/j2sdk1.4.0_01/bin', keeping.
> > > > > > > debug: PATH included '/root/bin', which doesn't exist,
dropping.
> > > > > > > debug: Final PATH set to:
> > > > > > >
> > > > >
> > >
> >
>/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin
> > :
> > > > > > > /usr/java/j2sdk1.4.0_01/bin
> > > > > > > debug: ignore: using a test message to lint rules
> > > > > > > debug: using "/usr/local/share/spamassassin" for default rules
dir
> > > > > > > debug: using "/etc/mail/spamassassin" for site rules dir
> > > > > > > debug: using "/root/.spamassassin" for user state dir
> > > > > > > debug: using "/root/.spamassassin/user_prefs" for user prefs
file
> > > > > > > debug: using "/root/.spamassassin" for user state dir
> > > > > > > debug: bayes: no dbs present, cannot scan:
> > > > > /root/.spamassassin/bayes_toks
> > > > > > > debug: Score set 1 chosen.
> > > > > > > debug: Initialising learner
> > > > > > > debug: bayes: Not available for scanning, only 0 spam(s) in
Bayes
> > DB <
> > > > > 200
> > > > > > > debug: bayes: 28588 untie-ing
> > > > > > > debug: bayes: 28588 untie-ing db_toks
> > > > > > > debug: is Net::DNS::Resolver available? yes
> > > > > > > debug: trying (3) gwdg.de...
> > > > > > > debug: looking up MX for 'gwdg.de'
> > > > > > > debug: MX for 'gwdg.de' exists? 1
> > > > > > > debug: MX lookup of gwdg.de succeeded => Dns available (set
> > > > > dns_available to
> > > > > > > hardcode)
> > > > > > > debug: is DNS available? 1
> > > > > > > debug: all '*From' addrs:
ignore at compiling.spamassassin.taint.org
> > > > > > > debug: running header regexp tests; score so far=0
> > > > > > > debug: running body-text per-line regexp tests; score so
far=1.27
> > > > > > > debug: Razor2 is not available
> > > > > > > debug: running raw-body-text per-line regexp tests; score so
> > far=1.27
> > > > > > > debug: running uri tests; score so far=1.27
> > > > > > > debug: uri tests: Done uriRE
> > > > > > > debug: running full-text regexp tests; score so far=1.27
> > > > > > > debug: Razor2 is not available
> > > > > > > debug: DCCifd is not available: no r/w dccifd socket found.
> > > > > > > debug: Current PATH is:
> > > > > > >
> > > > >
> > >
> >
>/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin
> > :
> > > > > > > /usr/java/j2sdk1.4.0_01/bin
> > > > > > > debug: DCC is not available: no executable dccproc found.
> > > > > > > debug: Pyzor is not available: pyzor not found
> > > > > > > debug: all '*To' addrs:
> > > > > > > debug: RBL: success for 1 of 1 queries
> > > > > > > debug: running meta tests; score so far=1.27
> > > > > > > debug: is spam? score=1.27 required=5
> > tests=DATE_MISSING,NO_REAL_NAME
> > > > > > > Status: RO
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > ----- Original Message -----
> > > > > > > From: "Kevin Spicer" <kevins at BMRB.CO.UK>
> > > > > > > To: <MAILSCANNER at JISCMAIL.AC.UK>
> > > > > > > Sent: Thursday, October 16, 2003 6:27 PM
> > > > > > > Subject: Re: MailScanner + SpamAssassin
> > > > > > >
> > > > > > >
> > > > > > > > On Thu, 2003-10-16 at 21:54, Roger Jochem wrote:
> > > > > > > >
> > > > > > > >
> > > > > > > > >But how can I send you the output of this command to and
> > e-mail? It
> > > > > > > > >doesn't
> > > > > > > > >accept a pipe and sendmail...
> > > > > > > >
> > > > > > > >
> > > > > > > > it writes to stderr not stdout, so do...
> > > > > > > > spamassassin --lint -D 2>&1 | [whatever command you want]
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > BMRB International
> > > > > > > > http://www.bmrb.co.uk
> > > > > > > > +44 (0)20 8566 5000
> > > > > > > >
> > _________________________________________________________________
> > > > > > > > This message (and any attachment) is intended only for the
> > > > > > > > recipient and may contain confidential and/or privileged
> > > > > > > > material.  If you have received this in error, please
contact
> > the
> > > > > > > > sender and delete this message immediately.  Disclosure,
copying
> > > > > > > > or other action taken in respect of this email or in
> > > > > > > > reliance on it is prohibited.  BMRB International Limited
> > > > > > > > accepts no liability in relation to any personal emails, or
> > > > > > > > content of any email which does not directly relate to our
> > > > > > > > business.
> > > > > > --
> > > > > > Denis Beauchemin, analyste
> > > > > > Université de Sherbrooke, S.T.I.
> > > > > > T: 819.821.8000x2252 F: 819.821.8045
> > >
> > > --
> > > Julian Field
> > > www.MailScanner.info
> > > MailScanner thanks transtec Computers for their support
> > >
> > > PGP footprint: EE81 D763 3DB0 0BFD E1DC  7222 11F6 5947 1415 B654
> --
> Denis Beauchemin, analyste
> Université de Sherbrooke, S.T.I.
> T: 819.821.8000x2252 F: 819.821.8045