MailScanner & Razor

[Devon Harding - GTHLA]

Yes, but register fails...

[root at glams root]# razor-admin -register
Error 202 while performing register, aborting.


-----Original Message-----
From: Ugo Bellavance [mailto:ugob at CAMO-ROUTE.COM] 
Sent: Tuesday, November 11, 2003 10:13 AM
To: MAILSCANNER at JISCMAIL.AC.UK
Subject: Re: MailScanner & Razor

> -----Message d'origine-----
> De : Devon Harding - GTHLA [mailto:DHarding at GILATLA.COM]
> Envoyé : Tuesday, November 11, 2003 10:10 AM
> À : MAILSCANNER at JISCMAIL.AC.UK
> Objet : Re: MailScanner & Razor
> 
> 
> Anyone?
> 
> -----Original Message-----
> From: Devon Harding - GTHLA
> Sent: Monday, November 10, 2003 1:25 PM
> To: MAILSCANNER at JISCMAIL.AC.UK
> Subject: Re: MailScanner & Razor
> 
> Now I get this...
> 
> [root at glams root]# razor-admin -register
> Error 202 while performing register, aborting.
> 
> Is any other configuration required after this?

I never did more than compiling and installing, so I guess not.
> 
> -Devon
> 
> 
> -----Original Message-----
> From: Devon Harding - GTHLA
> Sent: Monday, November 10, 2003 12:31 PM
> To: MAILSCANNER at JISCMAIL.AC.UK
> Subject: Re: MailScanner & Razor
> 
> I tried to install the agent before the sdk.  When I installed the sdk
> from CPAN, the agent installed fine.
> 
> -Devon
> 
> -----Original Message-----
> From: Ugo Bellavance [mailto:ugob at CAMO-ROUTE.COM]
> Sent: Monday, November 10, 2003 12:28 PM
> To: MAILSCANNER at JISCMAIL.AC.UK
> Subject: Re: MailScanner & Razor
> 
> > Got the following error running 'make install' from 
> razor-agents-2.36:
> >
> > Can't locate Digest/Nilsimsa.pm in @INC (@INC contains: lib
> > /usr/lib/perl5/5.8.0/i386-linux-thread-multi /usr/lib/perl5/5.8.0
> > /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi
> > /usr/lib/perl5/site_perl/5.8.0 /usr/lib/perl5/site_perl/5.6.1
> > /usr/lib/perl5/site_perl
> > /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi
> > /usr/lib/perl5/vendor_perl/5.8.0 /usr/lib/perl5/vendor_perl .) at
> > lib/Razor2/Client/Engine.pm line 5.
> > BEGIN failed--compilation aborted at
> > lib/Razor2/Client/Engine.pm line 5.
> > Compilation failed in require at (eval 9) line 3.
> >         ...propagated at /usr/lib/perl5/5.8.0/base.pm line 64.
> > BEGIN failed--compilation aborted at
> > lib/Razor2/Client/Core.pm line 24.
> > Compilation failed in require at (eval 3) line 3.
> >         ...propagated at /usr/lib/perl5/5.8.0/base.pm line 64.
> > BEGIN failed--compilation aborted at
> > lib/Razor2/Client/Agent.pm line 18.
> > Compilation failed in require at blib/script/razor-client line 21.
> > BEGIN failed--compilation aborted at 
> blib/script/razor-client line 21.
> > make: *** [install_razor_agents] Error 2
> 
> The previous steps went OK?
> 
> 
> >
> > -Devon
> >
> > -----Original Message-----
> > From: Julian Field [mailto:mailscanner at ECS.SOTON.AC.UK]
> > Sent: Monday, November 10, 2003 11:39 AM
> > To: MAILSCANNER at JISCMAIL.AC.UK
> > Subject: Re: MailScanner & Razor
> >
> > At 16:27 10/11/2003, you wrote:
> > >How do I integrate MailScanner with Razor...  Is there a
> > site with docs
> > >on this?
> >
> > Install SpamAssassin and then Razor.
> > Fetch Mail-SpamAssassin-2.60.tar.gz from www.spamassassin.org
> >
> > tar xzf Mail-SpamAssassin-2.60.tar.gz
> > cd Mail-SpamAssassin-2.60
> > perl Makefile.PL
> > make
> > make test (don't worry if some spamc or spamd tests fail)
> > make install
> >
> > Then go to razor.sourceforge.net, download razor-agents-sdk.... and
> > razor-agents.... and follow the installation instructions on that
> > website.
> > SpamAssassin will automatically find razor if it is installed.
> >
> > To make MailScanner use SpamAssassin, just set
> >          Use SpamAssassin = yes
> > in MailScanner.conf and restart MailScanner.
> > --
> > Julian Field
> > www.MailScanner.info
> > MailScanner thanks transtec Computers for their support
> >
> > PGP footprint: EE81 D763 3DB0 0BFD E1DC  7222 11F6 5947 1415 B654
> >
>