RH9 Parser.pm error

[T²]

Ron,

Thanks for the advice, it worked but I found problems with other
programs which required Perl modules.  I ended up removing the Perl 5.6
directory (A suggestion in the MS mail archives), left the 5.8 directory
and reinstalled MS.  I also had to reinstall other Perl modules again
:-(  I am just surprise that RH would not have handled this during the
upgrade.

Thanks again Ron and Julian for your help.

Tom

-----Original Message-----
From: MailScanner mailing list [mailto:MAILSCANNER at JISCMAIL.AC.UK] On
Behalf Of Ron Pool
Sent: Tuesday, May 13, 2003 5:31 AM
To: MAILSCANNER at JISCMAIL.AC.UK
Subject: Re: RH9 Parser.pm error

I upgraded a RH7.3 box to RH9 this weekend, installed the new
MailScanner, 
and ran into the exact same problem.  To solve it, I installed 
MIME::Parser, not HTML::Parser, this way:

    perl -MCPAN -e shell
    o conf prerequisites_policy ask
    install MIME::Parser
    quit

If I recall correctly, CPAN wanted to add a few prerequisites for 
MIME::Parser, so I let it.

                                        -- Ron
-- 
Ron Pool                                            Internet:
amp1 at cornell.edu
Computer Services, NYSAES; Food Research Lab; West North St.; Geneva, NY
14456

On Mon, 12 May 2003, T² wrote:
>          perl -MCPAN -e shell
>          o conf prerequisites_policy ask
>          install HTML::Parser
>          quit
> Julian,
> 
> I followed your instructions below to manual install the HTML::Parser
> and it was installed in the same directory as the upgraded RPM.  I am
> still getting the error.
> 
> Tom
> 
> 
> -----Original Message-----
> From: MailScanner mailing list [mailto:MAILSCANNER at JISCMAIL.AC.UK] On
> Behalf Of Julian Field
> Sent: Monday, May 12, 2003 3:11 AM
> To: MAILSCANNER at JISCMAIL.AC.UK
> Subject: Re: RH9 Parser.pm error
> 
> At 09:53 12/05/2003, you wrote:
> 
> >I have just upgraded from RH7.3 to RH9 and now receive the following
> error
> >when starting Mailscanner:
> 
> Ah! There's your problem. Upgrading results in a load of Perl modules
> being
> installed in the wrong place, due to a new version of Perl in RH8 and
9.
> 
> You can safely leave the RPM's in place, but use CPAN to install the
> modules again.
>          perl -MCPAN -e shell
>          o conf prerequisites_policy ask
>          install HTML::Parser
>          quit
> 
> 
> >
> >
> >[root at ns MailScanner-4.20-1]# /etc/init.d/MailScanner start
> >
> >Starting MailScanner daemons:
> >
> >          incoming sendmail: [  OK  ]
> >
> >          outgoing sendmail: [  OK  ]
> >
> >          MailScanner:       Can't locate MIME/Parser.pm in @INC
(@INC
> > contains: /usr/lib/MailScanner
> > /usr/lib/perl5/5.8.0/i386-linux-thread-multi /usr/lib/perl5/5.8.0
> > /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi
> > /usr/lib/perl5/site_perl/5.8.0 /usr/lib/perl5/site_perl
> > /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi
> > /usr/lib/perl5/vendor_perl/5.8.0 /usr/lib/perl5/vendor_perl
> > /usr/lib/perl5/5.8.0/i386-linux-thread-multi /usr/lib/perl5/5.8.0 .
> > /usr/lib/MailScanner) at /usr/lib/MailScanner/MailScanner/Message.pm
> line 40.
> >
> >BEGIN failed--compilation aborted at
> >/usr/lib/MailScanner/MailScanner/Message.pm line 40.
> >
> >Compilation failed in require at /usr/sbin/MailScanner line 48.
> >
> >BEGIN failed--compilation aborted at /usr/sbin/MailScanner line 48.
> >
> >[  OK  ]
> >
> >
> >
> >I have checked and the RPM has been installed at
>
>/usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi/HTML/Parser.pm
> .
> >If I try to uninstall the rpm, it errors out with perl(HTML::Parser)
is
> >needed by (installed) perl-libwww-perl-5.65-6.   I have checked the
> >threads and it seems that others have it installed on RH9 and dont
have
> >the problem.  I appreciate any help.
> >
> >
> >
> >Tom
> 
> --
> Julian Field
> www.MailScanner.info
> MailScanner thanks transtec Computers for their support