failed
Julian Field
mailscanner at ecs.soton.ac.uk
Thu Mar 27 14:31:35 GMT 2003
Okay, the installation of the HTML-Parser RPM didn't work.
First, try to remove the old one:
rpm -e perl-HTML-Parser
rm -rf /usr/lib/perl5/site_perl/5.6.1/i586-linux/auto/HTML/Parser
Then try running ./install.sh again.
At 14:06 27/03/2003, you wrote:
>I am using SuSE 8.0, perl 5.61, MailScanner 4.13-3, fresh install. The
>output of install is> Attempting to build and install
>perl-HTML-Parser-3.26-2
> > Installing perl-HTML-Parser-3.26-2.src.rpm
> > Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.72039
> > + umask 022
> > + cd /usr/src/packages/BUILD
> > + cd /usr/src/packages/BUILD
> > + rm -rf HTML-Parser-3.26
> > + /bin/gzip -dc /usr/src/packages/SOURCES/HTML-Parser-3.26.tar.gz
> > + tar -xf -
> > + STATUS=0
> > + '[' 0 -ne 0 ']'
> > + cd HTML-Parser-3.26
> > ++ /usr/bin/id -u
> > + '[' 0 = 0 ']'
> > + /bin/chown -Rhf root .
> > ++ /usr/bin/id -u
> > + '[' 0 = 0 ']'
> > + /bin/chgrp -Rhf root .
> > + /bin/chmod -Rf a+rX,g-w,o-w .
> > + exit 0
> > Executing(%build): /bin/sh -e /var/tmp/rpm-tmp.45905
> > + umask 022
> > + cd /usr/src/packages/BUILD
> > + cd HTML-Parser-3.26
> > + CFLAGS=-O2 -march=i486 -mcpu=i686
> > + perl Makefile.PL PREFIX=/var/tmp/perl-HTML-Parser-root/usr
> > Checking if your kit is complete...
> > Looks good
> > Writing Makefile for HTML::Parser
> > + make
> > cp lib/HTML/HeadParser.pm blib/lib/HTML/HeadParser.pm
> > cp lib/HTML/LinkExtor.pm blib/lib/HTML/LinkExtor.pm
> > cp lib/HTML/PullParser.pm blib/lib/HTML/PullParser.pm
> > cp Parser.pm blib/lib/HTML/Parser.pm
> > cp lib/HTML/Entities.pm blib/lib/HTML/Entities.pm
> > cp lib/HTML/TokeParser.pm blib/lib/HTML/TokeParser.pm
> > cp lib/HTML/Filter.pm blib/lib/HTML/Filter.pm
> > /usr/bin/perl /usr/lib/perl5/5.6.1/ExtUtils/xsubpp -typemap
>/usr/lib/perl5/5.6.
> > 1/ExtUtils/typemap -typemap typemap Parser.xs > Parser.xsc && mv
>Parser.xsc Par
> > ser.c
> > /usr/bin/perl mkhctype >hctype.h
> > /usr/bin/perl mkpfunc >pfunc.h
> > cc -c -fno-strict-aliasing -D_LARGEFILE_SOURCE
>-D_FILE_OFFSET_BITS=64 -O2 -pip
> > e -DVERSION=\"3.26\" -DXS_VERSION=\"3.26\" -fPIC
>"-I/usr/lib/perl5/5.6.1/i586-
> > linux/CORE" -DMARKED_SECTION Parser.c
> > Running Mkbootstrap for HTML::Parser ()
> > chmod 644 Parser.bs
> > rm -f blib/arch/auto/HTML/Parser/Parser.so
> > LD_RUN_PATH="" cc -shared Parser.o -o
>blib/arch/auto/HTML/Parser/Parser.so
> >
> > chmod 755 blib/arch/auto/HTML/Parser/Parser.so
> > cp Parser.bs blib/arch/auto/HTML/Parser/Parser.bs
> > chmod 644 blib/arch/auto/HTML/Parser/Parser.bs
> > Manifying blib/man3/HTML::HeadParser.3pm
> > Manifying blib/man3/HTML::LinkExtor.3pm
> > Manifying blib/man3/HTML::PullParser.3pm
> > Manifying blib/man3/HTML::Parser.3pm
> > Manifying blib/man3/HTML::TokeParser.3pm
> > Manifying blib/man3/HTML::Entities.3pm
> > Manifying blib/man3/HTML::Filter.3pm
> > + exit 0
> > Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.32518
> > + umask 022
> > + cd /usr/src/packages/BUILD
> > + cd HTML-Parser-3.26
> > + rm -rf /var/tmp/perl-HTML-Parser-root
> > ++ perl -V:installarchlib
> > + eval 'installarchlib='\''/usr/lib/perl5/5.6.1/i586-linux'\'';'
> > ++ installarchlib=/usr/lib/perl5/5.6.1/i586-linux
> > + mkdir -p /var/tmp/perl-HTML-Parser-root//usr/lib/perl5/5.6.1/i586-linux
> > + make install
> > Installing
>/var/tmp/perl-HTML-Parser-root/usr/lib/perl5/site_perl/5.6.1/i586-lin
> > ux/auto/HTML/Parser/Parser.bs
> > Installing
>/var/tmp/perl-HTML-Parser-root/usr/lib/perl5/site_perl/5.6.1/i586-lin
> > ux/auto/HTML/Parser/Parser.so
> > Files found in blib/arch: installing files in blib/lib into
>architecture depende
> > nt library tree
> > Installing
>/var/tmp/perl-HTML-Parser-root/usr/lib/perl5/site_perl/5.6.1/i586-lin
> > ux/HTML/TokeParser.pm
> > Installing
>/var/tmp/perl-HTML-Parser-root/usr/lib/perl5/site_perl/5.6.1/i586-lin
> > ux/HTML/HeadParser.pm
> > Installing
>/var/tmp/perl-HTML-Parser-root/usr/lib/perl5/site_perl/5.6.1/i586-lin
> > ux/HTML/Entities.pm
> > Installing
>/var/tmp/perl-HTML-Parser-root/usr/lib/perl5/site_perl/5.6.1/i586-lin
> > ux/HTML/PullParser.pm
> > Installing
>/var/tmp/perl-HTML-Parser-root/usr/lib/perl5/site_perl/5.6.1/i586-lin
> > ux/HTML/Parser.pm
> > Installing
>/var/tmp/perl-HTML-Parser-root/usr/lib/perl5/site_perl/5.6.1/i586-lin
> > ux/HTML/Filter.pm
> > Installing
>/var/tmp/perl-HTML-Parser-root/usr/lib/perl5/site_perl/5.6.1/i586-lin
> > ux/HTML/LinkExtor.pm
> > Installing
>/var/tmp/perl-HTML-Parser-root/usr/man/man3/HTML::HeadParser.3pm
> > Installing
>/var/tmp/perl-HTML-Parser-root/usr/man/man3/HTML::TokeParser.3pm
> > Installing /var/tmp/perl-HTML-Parser-root/usr/man/man3/HTML::Parser.3pm
> > Installing /var/tmp/perl-HTML-Parser-root/usr/man/man3/HTML::Filter.3pm
> > Installing /var/tmp/perl-HTML-Parser-root/usr/man/man3/HTML::Entities.3pm
> > Installing
>/var/tmp/perl-HTML-Parser-root/usr/man/man3/HTML::PullParser.3pm
> > Installing
>/var/tmp/perl-HTML-Parser-root/usr/man/man3/HTML::LinkExtor.3pm
> > Writing
>/var/tmp/perl-HTML-Parser-root/usr/lib/perl5/site_perl/5.6.1/i586-linux/
> > auto/HTML/Parser/.packlist
> > Appending installation info to
>/var/tmp/perl-HTML-Parser-root/usr/lib/perl5/site
> > _perl/5.6.1/i586-linux/perllocal.pod
> > + '[' -x /usr/lib/rpm/brp-compress ']'
> > + /usr/lib/rpm/brp-compress
> > + find /var/tmp/perl-HTML-Parser-root/usr -type f -print
> > + sed 's@^/var/tmp/perl-HTML-Parser-root@@g'
> > + grep -v perllocal.pod
> > + grep -v '\.packlist'
> > ++ cat HTML-Parser-3.26-filelist
> > + '[' '/usr/lib/perl5/site_perl/5.6.1/i586-linux/HTML/TokeParser.pm
> > /usr/lib/perl5/site_perl/5.6.1/i586-linux/HTML/HeadParser.pm
> > /usr/lib/perl5/site_perl/5.6.1/i586-linux/HTML/Entities.pm
> > /usr/lib/perl5/site_perl/5.6.1/i586-linux/HTML/PullParser.pm
> > /usr/lib/perl5/site_perl/5.6.1/i586-linux/HTML/Parser.pm
> > /usr/lib/perl5/site_perl/5.6.1/i586-linux/HTML/Filter.pm
> > /usr/lib/perl5/site_perl/5.6.1/i586-linux/HTML/LinkExtor.pm
> > /usr/lib/perl5/site_perl/5.6.1/i586-linux/auto/HTML/Parser/Parser.bs
> > /usr/lib/perl5/site_perl/5.6.1/i586-linux/auto/HTML/Parser/Parser.so
> > /usr/man/man3/HTML::Filter.3pm.gz
> > /usr/man/man3/HTML::HeadParser.3pm.gz
> > /usr/man/man3/HTML::Entities.3pm.gz
> > /usr/man/man3/HTML::Parser.3pm.gz
> > /usr/man/man3/HTML::LinkExtor.3pm.gz
> > /usr/man/man3/HTML::TokeParser.3pm.gz
> > /usr/man/man3/HTML::PullParser.3pm.gzX' = X ']'
> > + RPM_BUILD_ROOT=/var/tmp/perl-HTML-Parser-root
> > + export RPM_BUILD_ROOT
> > + test -x /usr/sbin/Check -a 0 = 0 -o -x /usr/sbin/Check -a '!' -z
>/var/tmp/perl
> > -HTML-Parser-root
> > + echo 'I call /usr/sbin/Check...'
> > I call /usr/sbin/Check...
> > + /usr/sbin/Check
> > + /usr/lib/rpm/brp-compress
> > Processing files: perl-HTML-Parser-3.26-2
> > Finding Provides: (using /usr/lib/rpm/find-provides)...
> > Finding Requires: (using /usr/lib/rpm/find-requires)...
> > Provides: Parser.so
> > Requires: ld-linux.so.2 libc.so.6 libc.so.6(GLIBC_2.0)
>libc.so.6(GLIBC_2.1.3)
> > Wrote: /usr/src/packages/RPMS/i386/perl-HTML-Parser-3.26-2.i386.rpm
> > Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.91007
> > + umask 022
> > + cd /usr/src/packages/BUILD
> > + cd HTML-Parser-3.26
> > + rm -rf /var/tmp/perl-HTML-Parser-root
> > + exit 0
> > Executing(--clean): /bin/sh -e /var/tmp/rpm-tmp.91007
> > + umask 022
> > + cd /usr/src/packages/BUILD
> > + rm -rf HTML-Parser-3.26
> > + exit 0
> >
> >
> >
> >
> > Do not worry too much about errors from the next command.
> > It is quite likely that some of the Perl modules are
> > already installed on your system.
> >
> > The important ones are HTML-Parser and MIME-tools.
> >
> > perl-HTML-Parser
>##################################################
> > cannot remove
>/usr/lib/perl5/site_perl/5.6.1/i586-linux/auto/HTML/Parser - direc
> > tory not empty
> > cannot remove /usr/lib/perl5/site_perl/5.6.1/i586-linux/HTML -
>directory not emp
> > ty > Please do not forget to kill your MailScanner version 3 processes
> > before starting version 4.
> > linux:/home/dbtrol/MailScanner-4.13-3 # rcsendmail stop
> > Shutting down SMTP port done
> > linux:/home/dbtrol/MailScanner-4.13-3 # chkconfig senmail off
> > senmail: unknown service
> > linux:/home/dbtrol/MailScanner-4.13-3 # chkconfig sendmail off
> > linux:/home/dbtrol/MailScanner-4.13-3 # chk MailScanner on
> > bash: chk: command not found
> > linux:/home/dbtrol/MailScanner-4.13-3 # chkconfig MailScanner on
> > linux:/home/dbtrol/MailScanner-4.13-3 # rcMailScanner start
> > Initializing sendmail and MailScanner
>failed
>Can someone tell me what to do.
>TIA
>David
--
Julian Field
www.MailScanner.info
MailScanner thanks transtec Computers for their support
More information about the MailScanner
mailing list