mail not being scanned after reboot althought MailScanner was running

[Joe Quinn]

Haven't a clue what this means :-)

[root at raq1 /root]# chkconfig --list | grep -i mail
sendmail 0:off 1:off 2:off 3:on 4:on 5:on 6:off
MailScanner 0:off 1:off 2:on 3:off 4:off 5:off 6:off
[root at raq1 /root]#

Can you advise please?

Joe Quinn, QITC Internet Solutions (joe at qitc.co.uk)
Cisco re-seller, Cobalt Sapphire Partner. www.qitc.net/stocklist
Web Site Hosting, Server Hosting, Co-location.
Tel: (UK) +44 776 737 1234

----- Original Message -----
From: "Julian Field" <mailscanner at ECS.SOTON.AC.UK>
To: <MAILSCANNER at JISCMAIL.AC.UK>
Sent: Tuesday, January 14, 2003 3:23 PM
Subject: Re: mail not being scanned after reboot althought MailScanner was
running


Check your init.d to ensure only MailScanner is being fired up, not the
"sendmail" init.d script as well.
chkconfig --list | grep -i mail
should show that sendmail is off and MailScanner is on.

At 14:56 14/01/2003, you wrote:
>Hi,
>
>I'm running version 4.11-1 on a RaQ3
>
>Strange thing this morning, I noticed an email coming in from a source that
>would normally have been tagged as spam but wasn't.
>
>I had a look at the header and sure enough, no indication that MailScanner
>had checked it???
>
>I ran the top command and it showed MailScanner was running a few processes
>then tailed the maillog which showed mail coming in but no scan???
>
>I traced the exact time the problem arose back to a reboot I did;
>
>reboot   system boot  2.2.16C32_III    Sun Jan 12 23:28         (1+11:23)
>
>prior to this all was OK but after this, no scanning.
>
>I stopped MailScanner then started it again after checking it was
definitely
>stopped;
>
>[root at raq1 /root]# /etc/rc.d/init.d/MailScanner stop
>Shutting down MailScanner daemons:
>          MailScanner:       ERROR!
>          incoming sendmail: sendmail ok
>          outgoing sendmail: sendmail ok
>[root at raq1 /root]# ps -auxww | grep -i mail
>root       439  0.0  0.0  1192  456 pts/0    S    10:53   0:00 grep -i mail
>[root at raq1 /root]# ps -auxww | grep -i mail
>[root at raq1 /root]# /etc/rc.d/init.d/MailScanner start
>
>All is now OK and mail is definitely being scanned but what caused the
>problem, any ideas?
>
>Joe Quinn, QITC Internet Solutions (joe at qitc.co.uk)
>www.qitc.net

--
Julian Field
www.MailScanner.info
MailScanner thanks transtec Computers for their support