Problems after updating to 4.01-5

[Andrew G Allen]

I tried the suggestions, but found the following:

- ClamAV worked without problems with 4.01-3, even though code was set to
'supported'.

- ClamAV would not work with 4.01-5, even though code was set to 'none'.

Regards,

Andrew G Allen
email: mail at projectandrew.com | voice: +44 (0) 7958 540596

--- Disclaimer ---
This e-mail and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they are
addressed. If you have received this email in error, please notify the
system manager.

> To quote from the log output you included:
>
> FATAL: Encountered code that does not meet configured acceptable
> stability at /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1241
> FATAL: *Please go and READ*
> http://www.sng.ecs.soton.ac.uk/mailscanner/install/codestatus.shtml as
> it will tell you what to do.
>
> I suggest you do what it says.
>
> At 01:03 22/10/2002, you wrote:
>>I just upgraded to 4.01-5 from 4.01-3 and when it starts to scan
>> messages the following pops up in my console window:
>>
>>Looks like a problem... dumping status information at
>>/usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1229
>>Scanner "antivir": scanning code status 1 - disinfect code status 1 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "f-secure": scanning code status 3 - disinfect code status 3 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "none": scanning code status 0 - disinfect code status 0 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "nod32": scanning code status 4 - disinfect code status 4 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "inoculate": scanning code status 4 - disinfect code status 4
>> at /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "clamav": scanning code status 2 - disinfect code status 0 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "inoculan": scanning code status 4 - disinfect code status 4 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "mcafee": scanning code status 4 - disinfect code status 4 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "panda": scanning code status 1 - disinfect code status 1 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "kaspersky": scanning code status 3 - disinfect code status 2
>> at /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "rav": scanning code status 4 - disinfect code status 4 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "sophos": scanning code status 4 - disinfect code status 4 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "command": scanning code status 4 - disinfect code status 4 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "f-prot": scanning code status 4 - disinfect code status 4 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>FATAL: Encountered code that does not meet configured acceptable
>> stability at /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1241
>>FATAL: *Please go and READ*
>>http://www.sng.ecs.soton.ac.uk/mailscanner/install/codestatus.shtml as
>> it will tell you what to do. at
>>/usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1243
>>Looks like a problem... dumping status information at
>>/usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1229
>>Scanner "antivir": scanning code status 1 - disinfect code status 1 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "f-secure": scanning code status 3 - disinfect code status 3 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "none": scanning code status 0 - disinfect code status 0 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "nod32": scanning code status 4 - disinfect code status 4 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "inoculate": scanning code status 4 - disinfect code status 4
>> at /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "clamav": scanning code status 2 - disinfect code status 0 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "inoculan": scanning code status 4 - disinfect code status 4 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "mcafee": scanning code status 4 - disinfect code status 4 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "panda": scanning code status 1 - disinfect code status 1 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "kaspersky": scanning code status 3 - disinfect code status 2
>> at /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "rav": scanning code status 4 - disinfect code status 4 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "sophos": scanning code status 4 - disinfect code status 4 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "command": scanning code status 4 - disinfect code status 4 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "f-prot": scanning code status 4 - disinfect code status 4 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>FATAL: Encountered code that does not meet configured acceptable
>> stability at /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1241
>>FATAL: *Please go and READ*
>>http://www.sng.ecs.soton.ac.uk/mailscanner/install/codestatus.shtml as
>> it will tell you what to do. at
>>/usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1243
>>Looks like a problem... dumping status information at
>>/usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1229
>>Scanner "antivir": scanning code status 1 - disinfect code status 1 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "f-secure": scanning code status 3 - disinfect code status 3 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "none": scanning code status 0 - disinfect code status 0 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "nod32": scanning code status 4 - disinfect code status 4 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "inoculate": scanning code status 4 - disinfect code status 4
>> at /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "clamav": scanning code status 2 - disinfect code status 0 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "inoculan": scanning code status 4 - disinfect code status 4 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "mcafee": scanning code status 4 - disinfect code status 4 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "panda": scanning code status 1 - disinfect code status 1 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "kaspersky": scanning code status 3 - disinfect code status 2
>> at /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "rav": scanning code status 4 - disinfect code status 4 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "sophos": scanning code status 4 - disinfect code status 4 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "command": scanning code status 4 - disinfect code status 4 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>Scanner "f-prot": scanning code status 4 - disinfect code status 4 at
>> /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1239
>>FATAL: Encountered code that does not meet configured acceptable
>> stability at /usr/lib/MailScanner/MailScanner/SweepViruses.pm line 1241
>>etc, etc....
>>
>>Any suggestions? It all worked ok before the upgrade. I am using F-prot
>> with ClamAV by the way...
>>
>>Thanks.
>>
>>
>>Andrew G Allen
>>email: mail at projectandrew.com | voice: +44 (0) 7958 540596
>>
>>--- Disclaimer ---
>>This e-mail and any files transmitted with it are confidential and
>> intended solely for the use of the individual or entity to whom they
>> are addressed. If you have received this email in error, please notify
>> the system manager.
>
> --
> Julian Field                Teaching Systems Manager
> jkf at ecs.soton.ac.uk         Dept. of Electronics & Computer Science Tel.
> 023 8059 2817          University of Southampton
>                              Southampton SO17 1BJ
>
> --
> This message has been scanned for viruses and dangerous
> content by MailScanner, and is believed to be clean.




--
This message has been scanned for viruses and dangerous
content by MailScanner, and is believed to be clean.