SpamAssassin 2.30

[Kelly Hamlin]

all tests came back ok, except razor (1st test) cause i dont have it
installed

----- Original Message -----
From: "Julian Field" <jkf at ECS.SOTON.AC.UK>
To: <MAILSCANNER at JISCMAIL.AC.UK>
Sent: Sunday, June 16, 2002 10:22 AM
Subject: Re: SpamAssassin 2.30


> What happened when you did a "make test" inside the 2.30 directory?
>
> At 14:49 16/06/2002, you wrote:
> >hrmm, spamassassin installed fine on my primary gateway mail server,
however
> >on my secondary, it all install fine, but when i goto restart mailscanner
> >(3-20-3) this is what i get..
> >
> >Starting virus scanner...
> >root at grael:/opt/mailscanner/bin# Bareword found where operator expected
at
> >(eval 37) line 764, near "25FREEMEGS_URL_body_test"
> >         (Missing operator before FREEMEGS_URL_body_test?)
> >Bareword found where operator expected at (eval 37) line 2854, near
> >"25FREEMEGS_URL_body_test"
> >         (Missing operator before FREEMEGS_URL_body_test?)
> >Failed to compile body SpamAssassin tests, skipping:
> >         (syntax error at (eval 37) line 764, near
"25FREEMEGS_URL_body_test
> >"
> >Can't use global $_ in "my" at (eval 37) line 766, near ";
> >            $_ "
> >syntax error at (eval 37) line 2854, near "25FREEMEGS_URL_body_test"
> >syntax error at (eval 37) line 3647, near ";
> >}"
> >)
> >Failed to run DIFFERENT_REPLY_TO SpamAssassin test, skipping:
> >         (Can't locate object method "check_for_spam_reply_to" via
package
> >"Mail::SpamAssassin::PerMsgStatus" (perhaps you forgot to load
> >"Mail::SpamAssassin::PerMsgStatus"?) at
> >/usr/lib/perl5/site_perl/Mail/SpamAssassin/PerMsgStatus.pm line 1701.
> >)
> >
> >
> >Not a huge deal since this server only sees about 10k mail a day..
> >
> >Any ideas? ive tried redownloading, and reinstalling several times.
> >
> >----- Original Message -----
> >From: "Julian Field" <jkf at ECS.SOTON.AC.UK>
> >To: <MAILSCANNER at JISCMAIL.AC.UK>
> >Sent: Saturday, June 15, 2002 8:53 AM
> >Subject: SpamAssassin 2.30
> >
> >
> > > A new SpamAssassin has just been released. You can download it from
> > > www.spamassassin.org.
> > >
> > > Install
> > > =======
> > > Installing 2.30 was a bit messier than it should have been. You need
to
> > > install Time-HiRes from CPAN first
> > >         perl -MCPAN -e shell
> > >         install Time-HiRes (or was it Time::HiRes?)
> > > and if you are using gcc on Solaris then you'll need to remove all the
> > > "-xO3 -xdepend" from all the Makefiles as you go.
> > >
> > > make test
> > > =========
> > > And it couldn't start spamd even when I tried shutting down
MailScanner
> > > first, so I don't know what's wrong there. You can skip the spamd
tests by
> > > doing
> > >         cd t
> > >         rm spamd*
> > >         cd ..
> > > before you "make test". You can quite safely skip spamd altogether as
> > > MailScanner doesn't use it anyway.
> > >
> > > In Use
> > > ======
> > > And SpamAssassin keeps spitting out "sh: dccproc: not found" errors as
I
> > > don't have the DCC system installed. But according to the SpamAssassin
> > > README, it's optional anyway. I suspect these can be stopped by adding
> > >         score DCC_CHECK 0.0
> > > to the spam.assassin.prefs.conf file.
> > >
> > > Summary
> > > =======
> > > The good news is that once I got it installed happily, it seems to be
> > > working just fine.
> > > --
> > > Julian Field                Teaching Systems Manager
> > > jkf at ecs.soton.ac.uk         Dept. of Electronics & Computer Science
> > > Tel. 023 8059 2817          University of Southampton
> > >                              Southampton SO17 1BJ
> > >
>
> --
> Julian Field                Teaching Systems Manager
> jkf at ecs.soton.ac.uk         Dept. of Electronics & Computer Science
> Tel. 023 8059 2817          University of Southampton
>                              Southampton SO17 1BJ
>