MS not starting after SpamAssassin install

[Mike Kercher]

No...I know which paths defined in @INC.  I'm not a perl guru so I don't
know how to modify the @INC path.

Thanks!

----- Original Message -----
From: "Julian Field" <mailscanner at ECS.SOTON.AC.UK>
To: <MAILSCANNER at JISCMAIL.AC.UK>
Sent: Monday, July 01, 2002 8:42 AM
Subject: Re: MS not starting after SpamAssassin install


> At 14:34 01/07/2002, you wrote:
> >Ok...here's a stupid question :)  Where is the @INC path defined?
>
> Read the error message. From your own posting, your @INC is
>
> (@INC contains:
> /usr/local/MailScanner/bin /usr/lib/perl5/5.6.0/i386-linux
> /usr/lib/perl5/5.6.0 /usr/lib/perl5/site_perl/5.6.0/i386-linux
> /usr/lib/perl5/site_perl/5.6.0 /usr/lib/perl5/site_perl .)
>
>
>
> >Mike
> >
> >----- Original Message -----
> >From: "Julian Field" <mailscanner at ECS.SOTON.AC.UK>
> >To: <MAILSCANNER at JISCMAIL.AC.UK>
> >Sent: Monday, July 01, 2002 4:31 AM
> >Subject: Re: MS not starting after SpamAssassin install
> >
> >
> > > At 01:40 01/07/2002, you wrote:
> > > >Ok...I ran into the same thing today.  I installed SpamAssassin via
CPAN
> > > >before I installed MS and Sophos.  I now see that was a mistake :)
> >Problem
> > > >is, I have tried to reinstall SA from CPAN and the problem persists
> >(force
> > > >install Mail::SpamAssassin).  Is there a way to uninstall SA and then
> >start
> > > >fresh?
> > >
> > > You'll have to dig into the directories on your @INC path (helpfully
> > > printed by the error message you keep getting :-) and manually delete
SA.
> > >
> > > Personally I never use CPAN to install SA, I do it with the
> > >          perl Makefile.PL
> > >          make
> > >          make test
> > >          make install
> > > route described on the website. This seems to work a treat. If you go
down
> > > this route and hit any problems, I have written an FAQ on the MS
website
> > > about installing Spamassassin 2.30/2.31.
> > >
> > >
> > > >Mike
> > > >
> > > >----- Original Message -----
> > > >From: "Support" <support at IQUEST.UCSB.EDU>
> > > >To: <MAILSCANNER at JISCMAIL.AC.UK>
> > > >Sent: Tuesday, May 21, 2002 7:26 PM
> > > >Subject: MS not starting after SpamAssassin install
> > > >
> > > >
> > > > > Hi,
> > > > >
> > > > >  I have Mailscanner running.  when I installed spamassassin I
tried
> > > >running
> > > > > ./check_mailscanner and ./check_mailscanner.linux but they come up
w/
> > > > > this...
> > > > >
> > > > >
> > > > > #########################################
> > > > > [root at frost bin]# ./check_mailscanner
> > > > > Starting virus scanner...
> > > > > Can't locate Mail/SpamAssassin.pm in @INC (@INC contains:
> > > > > /usr/local/MailScanner/bin /usr/lib/perl5/5.6.0/i386-linux
> > > > > /usr/lib/perl5/5.6.0 /usr/lib/perl5/site_perl/5.6.0/i386-linux
> > > > > /usr/lib/perl5/site_perl/5.6.0 /usr/lib/perl5/site_perl .) at
> > > > > /usr/local/MailScanner/bin/sendmail.pl line 46.
> > > > > Compilation failed in require at
> >/usr/local/MailScanner/bin/mailscanner
> > > >line
> > > > > 77.
> > > > >
> > > > > ########################################
> > > > >
> > > > > I found spamassassin to be here /usr/lib
> > > > > /perl5/site_perl/5.6.1/Mail/SpamAssassin.pm
> > > > >
> > > > > so I tried to edit the /bin/sendmail.pl file
> > > > >
> > > > > use lib '/usr/lib/perl5/site_perl/5.6.1/Mail';
> > > > > use lib '/usr/lib/perl5/site_perl/5.6.1/Mail/SpamAssassin';
> > > > >
> > > > >
> > > > > And that didnt work even thought the path to the module showed up
in
> >@INC.
> > > > >
> > > > >  This looks like a problem w/ Mailscanner or spam assassin
install.
> > > > >
> > > > >
> > > > > Is there another way of fixing this?
> > > > >
> > > > > thanx
> > > > >
> > > > >
> > >
> > > --
> > > Julian Field                Teaching Systems Manager
> > > jkf at ecs.soton.ac.uk         Dept. of Electronics & Computer Science
> > > Tel. 023 8059 2817          University of Southampton
> > >                              Southampton SO17 1BJ
> > >
>
> --
> Julian Field                Teaching Systems Manager
> jkf at ecs.soton.ac.uk         Dept. of Electronics & Computer Science
> Tel. 023 8059 2817          University of Southampton
>                              Southampton SO17 1BJ
>