Problem getting MailScanner 4.10 - New Release started:

[Julian Field]

At 16:46 04/12/2002, you wrote:
>In both instances, the locate and find, the result is the same, and
>nothing is reported.
>Does this mean that I need to re-install MailScanner?

In which case I think the building or installation of the MIME-tools
package failed.

If you do
         rpmbuild --rebuild perl-MIME-tools*rpm
what output does it produce? There will be quite a bit of it.
Can you then do
         rpm -Uvh /usr/src/redhat/RPMS/noarch/perl-MIME-tools*noarch.rpm
successfully?

> > -----Original Message-----
> > From: Julian Field [mailto:mailscanner at ECS.SOTON.AC.UK]
> > Sent: 2002 December 04 9:19 AM
> > To: MAILSCANNER at JISCMAIL.AC.UK
> > Subject: Re: Problem getting MailScanner 4.10 - New Release started:
> >
> >
> > Do
> >          locate Parser.pm
> > and see where it finds it. If it doesn't report anything, then
> >          find /usr -name '*Parser.pm*' -print
> > should find it.
> >
> > At 16:01 04/12/2002, you wrote:
> > >Yes, I ran the install.sh script.
> > >In fact, the first time I did, it was suggested that I run
> > >Update-MakeMaker.sh, to which I did.
> > >After it successfully completed, I ran the install.sh script for a
> > >second time, and did the 4 instructions that are listed on
> > the screen at
> > >the completion of the script.
> > >I then made the necessary changes to MailScanner.conf, and
> > then did the
> > >service MailScanner Start, to which you see the output below.
> > >
> > >
> > >Steve Dawes
> > >PH:  (403) 268-5527.
> > >Mailto:  sdawes at calgary.ca
> > >
> > >
> > >
> > >
> > >NOTICE::
> > >This communication is intended ONLY for the use of the
> > person or entity
> > >named above and may contain information that is confidential
> > or legally
> > >privileged. If you are not the intended recipient named
> > above or a person
> > >responsible for delivering messages or communications to the intended
> > >recipient, YOU ARE HEREBY NOTIFIED that any use,
> > distribution, or copying
> > >of this communication or any of the information contained in it is
> > >strictly prohibited. If you have received this communication
> > in error,
> > >please notify us immediately by telephone and then destroy
> > or delete this
> > >communication, or return it to us by mail if requested by
> > us. The City of
> > >Calgary thanks you for your attention and cooperation.
> > >
> > > > -----Original Message-----
> > > > From: Julian Field [mailto:mailscanner at ECS.SOTON.AC.UK]
> > > > Sent: 2002 December 04 8:31 AM
> > > > To: MAILSCANNER at JISCMAIL.AC.UK
> > > > Subject: Re: Problem getting MailScanner 4.10 - New
> > Release started:
> > > >
> > > >
> > > > Assuming you ran the "install.sh" script, it appears to have
> > > > not installed
> > > > the perl-MIME-tools correctly.
> > > >
> > > > At 14:53 04/12/2002, you wrote:
> > > > >I am having a problem getting the latest release of
> > > > MailScanner up and
> > > > >running.
> > > > >
> > > > >My system is running RedHat 8.0, and included in it is
> > > > sendmail-8.12.5.
> > > > >
> > > > >Here is what I get when I try to start MailScanner.
> > > > >
> > > > >[root at Panther root]# cd /
> > > > >[root at Panther /]# service MailScanner start
> > > > >Starting MailScanner daemons:
> > > > >          incoming sendmail: [  OK  ]
> > > > >          outgoing sendmail: [  OK  ]
> > > > >          MailScanner:       Can't locate MIME/Parser.pm in
> > > > @INC (@INC
> > > > > contains: /usr/lib/MailScanner
> > > > > /usr/lib/perl5/5.8.0/i386-linux-thread-multi
> > /usr/lib/perl5/5.8.0
> > > > > /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi
> > > > > /usr/lib/perl5/site_perl/5.8.0 /usr/lib/perl5/site_perl
> > > > > /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi
> > > > > /usr/lib/perl5/vendor_perl/5.8.0 /usr/lib/perl5/vendor_perl .
> > > > > /usr/lib/MailScanner) at
> > > > /usr/lib/MailScanner/MailScanner/Message.pm line 39.
> > > > >BEGIN failed--compilation aborted at
> > > > >/usr/lib/MailScanner/MailScanner/Message.pm line 39.
> > > > >Compilation failed in require at /usr/sbin/MailScanner line 46.
> > > > >BEGIN failed--compilation aborted at
> > /usr/sbin/MailScanner line 46.
> > > > >[  OK  ]
> > > > >[root at Panther /]#
> > > > >
> > > > >What am I doing wrong here?

--
Julian Field
www.MailScanner.info
MailScanner thanks transtec Computers for their support